Optimal design of a novel cylindrical sandwich panel with double arrow auxetic core under air blast loading

The increasing threat of explosions on the battle field and the terrorist action requires the development of more effective blast resistance materials and structures. Curved structure can support the external loads effectively by virtue of their spatial curvature. In review of the excellent energy absorption property of auxetic structure, employing auxetic structure as core material in curved sandwich shows the potential to improve the protection performance. In this study, a novel cylindrical sandwich panel with double arrow auxetic (DAA) core was designed and the numerical model was built by ABAQUS. Due to the complexity of the structure, systematic parameter study and optimal design are conducted. Two cases of optimal design were considered, case1 focuses on reducing the deflection and mass of the structure, while case2 focuses on reducing the deflection and increasing the energy absorption per unit mass. Parameter study and optimal design were conducted based on Latin Hypercube Sampling (LHD) method, artificial neural networks (ANN) metamodel and the nondominated sorting genetic algorithm (NSGA-Ⅱ). The Pareto front was obtained and the cylindrical DAA structure performed much better than its equal solid panel in both blast resistance and energy absorption capacity. Optimization results can be used as a reference for different applications.     

应急净水系统作业性能试验研究

用应急净水系统净化不同水质的原水，以考察其作业性能。结果表明，出水浊度不受原水浊度的影响，且低于1NTU；在试验原水浊度、温度范围内，出水流量较稳定，产水量符合设计要求；出水水质符合生活饮用水卫生标准的要求。     

喷涂层接触疲劳失效信号响应试验研究

采用超音速等离子喷涂设备制备了铁基自熔剂合金涂层，通过球盘式接触疲劳试验机考察了喷涂层的疲劳行为，使用扫描电子显微镜对涂层的截面和失效形貌进行了表征，研究了不同信号响应对涂层接触疲劳失效形式的指示作用。结果表明：在该应力水平下，喷涂层的接触疲劳失效形式为点蚀和分层失效。振动和扭矩信号的响应可以反馈不同的失效过程，点蚀失效过程中信号呈现渐变的特征，而分层失效过程中信号则发生明显的阶跃。     

基于任务冲击条件下弹药生产响应能力研究

在对弹药生产响应能力与生产速度关系分析的基础上,提出了基于任务冲击下,弹药生产响应能力的计算方法。对不同任务冲击度及生产速度约束条件下,弹药生产响应能力系数进行了对比,为任务冲击情况下弹药生产响应能力需求的确定提供参考。     

舰炮身管的模态分析与多目标优化

舰炮的炮口扰动是影响舰炮射击精度的重要因素。为了减少舰炮的炮口扰动,优化身管结构,建立了柔性身管的ABAQUS有限元模型,将有限元模型的模态计算值与模态试验值进行比较,发现建立的柔性身管有限元模型是合理可行的。提出了混沌量子粒子群算法与动力学联合优化的方法,进行身管和炮口的多目标优化。优化结果表明,优化后炮口中心的线速度、角速度和角位移与优化前相比显著减小,身管质量有所降低,结构更加合理,该优化方法有效可行,为下一步全炮总体优化设计提供了一定的借鉴。     

利用模态迭加法进行动响应分析应注意的问题

采用MSC-MARC程序的模态迭加法,对具有指数规律冲击载荷作用下的简支矩形板进行了响应计算,指出并讨论了应用模态迭加法求解结构动响应时应注意的几个问题.     

Study on dynamic response of multi-degree-of-freedom explosion vessel system under impact load

In order to study the dynamic response and calculate the axial dynamic coefficient of the monolayer cylindrical explosion vessel, the wall of vessel is simplified as a multi-degree-of-freedom (MDoF) undamped elastic foundation beam. Decoupling the coupled motion equation and using Duhamel's integrals, the solutions in generalized coordinates of the equations under exponentially decaying loads, square wave loads and triangular wave loads are calculated. These solutions are consistent in form with the solutions of single-degree-of-freedom (SDoF) undamped forced vibration simplified model. Based on the model, equivalent MDoF design method (also called MDoF dynamic coefficient method) of cylindrical explosion vessel is proposed. The traditional method can only predict the dynamic coefficient of torus portion around the explosion center, but this method can predict that of the vessel wall at any axial n dividing point position. It is verified that the prediction accuracy of this model is greatly improved compared with the SDoF model by comparing the results of this model with SDoF model and numerical simulation in different working conditions. However, the prediction accuracy decreases as the scaled distance decreases and approaches the end of the vessel, which is related to the accuracy of the empirical formula of the implosion load, the simplification of the explosion load direction, the boundary conditions, and the loading time difference.     

Dynamic modeling and parameter identification of a gun saddle ring

In this study, a theoretical nonlinear dynamic model was established for a saddle ring based on a dynamic force analysis of the launching process and the structure according to contact-impact theory. The ADAMS software was used to build a parameterized dynamic model of the saddle ring. A parameter identification method for the ring was proposed based on the particle swarm optimization algorithm. A loading test was designed and performed several times at different elevation angles. The response histories of the saddle ring with different loads were then obtained. The parameters of the saddle ring dynamic model were identified from statistics generated at a 50° elevation angle to verify the feasibility and accuracy of the proposed method. The actual loading history of the ring at a 70° elevation angle was taken as the model input. The response histories of the ring under these working conditions were obtained through a simulation. The simulation results agreed with the actual response. Thus, the effectiveness and applicability of the proposed dynamic model were verified, and it provides an effective method for modeling saddle rings.     

30mm半穿甲弹斜侵彻陶瓷/钢复合装甲的弹着角效应研究

设计了30mm半穿甲弹斜侵彻陶瓷/钢复合靶的弹道试验,采用高速摄像记录了弹靶作用过程,研究了弹着角、弹丸位移以及背板变形挠度的图像测量方法,通过仿真验证了该方法的可行性与准确性.基于高速摄像序列图像对弹靶作用过程进行了测量分析,结合试验数据研究了弹着角对半穿甲弹侵彻效能的影响.结果表明:弹着角导致弹丸受靶板的不对称阻力作用,侧向力及侧向力矩使得弹丸在侵彻过程中不断偏转,表现为侵彻路径呈曲线;在相同速度条件下,随着弹着角的增大,侵靶时间延长,背板变形挠度减小,侵彻效能降低.     

回顾性环境影响评价程序及内容研究

回顾性环境影响评价是环境影响评价的一个分支,是继常规环境影响评价之后,为检验实际环境影响和减缓措施的有效性行为.其工作内容主要包括环境检测、检验与评估、环境管理及其他环境研究.它既是对原环境影响评价过程中所使用的预测模型和结果正确性的验证,又是对原工作内容进行重要的补充和修正,并提出更为合理和实用的环境保护措施及对策.